Fast response
An engineer contacts you within one business day to confirm the details.
CUSTOM OPTICS
From spectral spec to mechanical design — filters, dichroic mirrors and reflectors built to your drawing. An engineer responds within one business day.
Typical capability range — anything beyond it can be developed on request
WHAT WE MAKE
All eight product lines support drawing-based modification and new development, across every substrate we stock













HOW IT WORKS
Every stage comes with a defined deliverable
Share the spectral spec, size and operating environment — drawings or sample photos can be emailed to sales@ootee.cn
Our engineers assess feasibility and the coating route, then return selection or equivalent alternatives — free of charge
Low-volume trial and sample validation, shipped with measured spectral curves and inspection data
Process parameters are locked in for volume runs, with per-lot inspection reports and stable long-term supply
TELL US WHAT YOU NEED
Fill in your contact details and technical requirements. An engineer will get back to you shortly. Fields marked * are required.
An engineer contacts you within one business day to confirm the details.
Our engineering team reviews your spectral spec and application, then advises on feasibility and selection.
Sample and small-batch runs are supported; volume production starts once you approve the samples.
CUSTOM OPTICS
Typical ranges are listed below — anything beyond them can still be evaluated for development
| Parameter | Standard Range | Achievable |
|---|---|---|
| Centre wavelength CWL | 200–2000 nm | 200–12000 nm |
| Bandwidth FWHM | 1–80 nm | 0.5–400 nm |
| Peak transmission | ≥85% | ≥95% |
| Blocking depth | OD3–OD6 | OD6 single substrate, OD8 cemented |
| Blocking range | 200–1100 nm | 200–20000 nm |
| Dimensions | D3–D50 mm | D2–D100 mm (square and custom shapes) |
| Angle of incidence | 0° | 0–45° |
| Substrate | K9, BK7, B270, D236T, fused silica | Ge, Si, sapphire, ZnSe, CaF2, coloured glass |
| Surface flatness | λ/4 | λ/10 |
| Coating process | Ion-assisted deposition (IAD) | Multilayer hard-coat stacks |
The questions we are asked most before a project starts
At minimum: centre wavelength and bandwidth (or the blocking / transmission band), blocking OD, size and thickness, angle of incidence, substrate and estimated quantity. A drawing or physical sample is even better — and if your spec is incomplete, just tell us the instrument model, light source and detector type and our engineers will derive the requirements.
Standard items start at 1 pc. Custom parts begin with a prototype and a low-volume run; volume production starts after you approve the samples. Unit price drops with quantity — your engineer will quote the volume tiers.
Standard prototypes ship within 15 days, express in as little as 7. Volume orders usually take 3–6 weeks depending on quantity and coating complexity. New coating development is quoted separately.
Yes. We accept PDF / DWG / DXF / STEP drawings and physical samples, machining to your drawing and reproducing the spectral performance. If the original part is discontinued or the spec cannot be met directly, we will propose an equivalent alternative.
Both prototypes and volume parts ship with measured spectral curves (CSV data you can load straight into optical simulation), plus dimensional and visual inspection reports. Material certificates, ROHS and third-party test reports are available on request.
It depends on substrate, number and precision of coating layers, size, quantity and inspection requirements. Your engineer will return a tiered quotation — prototype and volume pricing differ significantly, so it helps to state your expected annual volume up front.
An engineer responds within one business day — feasibility studies and selection advice are free