Dichroic Mirrors 8
Splits one beam into reflected and transmitted paths by wavelength with a steep edge and low loss — the core element of fluorescence detection and multi-channel imaging.
View series →
PRODUCT CENTER
Precision optical filters, dichroic mirrors and reflectors covering 200–12000 nm, with drawing-based customisation and volume supply.
Series grouped by optical function — click through for the full specification table.
Splits one beam into reflected and transmitted paths by wavelength with a steep edge and low loss — the core element of fluorescence detection and multi-channel imaging.
View series →
Metallic and dielectric options covering 200-10600 nm, delivering high reflectance without wavelength selection.
View series →
V-type and broadband AR coatings with residual reflectance down to 0.25%, design band 200-11000 nm, on flat, spherical and aspheric surfaces.
View series →
Passes everything below the cut-off and blocks beyond it, removing residual excitation light and sample thermal emission.
View series →
Retains everything beyond the cut-on and blocks shorter wavelengths deeply, separating emission peaks from residual excitation.
View series →
FWHM down to 0.5 nm with the center wavelength locked onto a specific line, isolating it out of a crowded spectrum.
View series →
Constrains both edges of the pass band — the most widely used wavelength-selective element in fluorescence, machine vision and spectroscopy.
View series →
Attenuates intensity by a fixed ratio across a wide band without altering the spectral distribution, keeping detectors inside their linear range.
View series →
Divides a beam into reflected and transmitted paths at a set ratio — essential in confocal microscopy, interferometry and coaxial illumination.
View series →
Multiple passbands on one substrate, sparing multi-label fluorescence and multichannel paths the splitting and recombining elements.
View series →
Deeply rejects one chosen wavelength — usually a laser line — while passing the rest, the key element for stray-line rejection in Raman and laser systems.
View series →
Filter sets configured for PCR, biochemical analysis and fluorescence microscopy, combining bandpass, longpass and dichroic elements.
View series →
Custom optical lenses: plano-convex, plano-concave, biconvex, biconcave, achromatic doublets, infrared and aspheric lenses in K9 glass, fused silica, sapphire, Ge / Si / ZnSe, surface figure to λ/10, AR / BBAR coating and build-to-print service.
View series →