ISO 9001 Certified Manufacturer 360° Factory Tour

LiDAR · Echo transmission & background suppression

LiDAR Optical Filters

Keep the laser echo, suppress out-of-band background light

For LiDAR, laser ranging and depth-sensing systems, we design narrowband transmission and out-of-band blocking based on laser wavelength, receiver path, detector response and operating environment, supplying filter elements for weak echo reception and optical module integration.

  • 905 / 940 / 1550 nm
  • Narrowband
  • Out-of-band blocking
  • Angle & thermal match
  • Built to optical path
905 / 940 / 1550 nm Common LiDAR design wavelengths
Narrowband + OD Passband and blocking set by detector response
Full-field match Angle and thermal drift checked against the real path
LiDAR emission and return path with a receiver filter
Emission, echo and receiver filter positions are schematic and vary between system architectures

What is a LiDAR optical filter?

A LiDAR optical filter is a wavelength-selective element in the laser detection path. The receiver normally uses a bandpass structure that transmits the band containing the target laser echo while reducing the share of other wavelengths reaching the detector.

LiDAR actively emits laser light and receives the signal returned by a target to obtain distance and related information. Outdoors the receiver picks up not only the echo but also background light from the sun and other sources. The filter uses wavelength differences to reduce the out-of-band portion and create better conditions for detection and signal processing.

The filter does not calculate distance and cannot remove all interference lying inside the same passband as the laser. Ranging performance also depends on transmit power, receiver aperture, target reflectance, detector, time or frequency processing and algorithms.

A LiDAR filter is not defined by a single centre wavelength. It must keep the useful echo under laser drift, temperature change and real angles of incidence.

How it works: why the receiver needs narrowband filtering

From emission to distance processing, the filter only performs wavelength selection in the receiver chain.

1

Emit laser at a set wavelength

A laser source has a real linewidth, and its wavelength may shift with temperature, drive conditions and device variation. The filter must cover the full expected operating range.

2

Receive echo and background

The returned signal enters the receiver optics together with broadband background light or signals from other equipment.

3

Pass the target band, block out-of-band

A bandpass filter keeps light near the laser echo and reduces the contribution of other wavelengths at the detector. Design balances loss of useful signal against background suppression.

4

Detector and system compute distance

Pulsed time-of-flight schemes use the transmit/receive time difference; coherent and other schemes use different signal processing.

Laser → transmit optics → target → echo + background → receiver optics → bandpass filter → detector → distance processing

Transmit chain Receiver chain Laser Tx optics Target Rx optics Bandpass Detector Processing Echo + background Design schematic, not measured data; element order varies by architecture
Element order is schematic; the filter may sit inside the receiver lens or at another design position.

Filters must be matched to the specific architecture; parameters from one receiver scheme cannot be applied to all LiDAR systems.

Common wavelengths and design directions

Wavelength names distinguish product directions; they are not complete specifications.

Wavelength System uses to evaluate Filter design focus
905 nm Pulsed ranging and LiDAR receivers Laser drift and out-of-band blocking within the silicon detector response
940 nm Some ToF, depth-sensing and ranging modules Source spectral width, angular distribution and full-field transmission
1550 nm Some pulsed or coherent LiDAR systems Actual laser range, receiver response and SWIR blocking design
Other wavelengths Dedicated ranging or multi-wavelength systems Customised to measured laser spectrum and system architecture

905 nm and 1550 nm are common LiDAR design directions; passband width and environmental requirements vary widely between architectures.

Relative intensity Wavelength (schematic, not to scale) Solar / ambient background Filter passband Laser echo spectrum 850 905 1550 Design schematic, not measured data; measured curves need angle, temperature, polarisation and range

Selection should also supply the shortest and longest laser wavelength over the operating temperature range, spectral width, receiver angles and target transmission.

Published specification examples

The following published product examples support parameter pages and option evaluation; they are not verified commitments for our own products.

905 nm narrowband filter example

Parameter Published specification
Reference product 905 nm narrowband filter
Centre wavelength CWL 905 ±2 nm
FWHM 10 ±2 nm
Transmission ≥85%
Average blocking optical density OD ≥4.0
Blocking range Specified stop bands within 200–1200 nm, excluding passband and transition regions
Design angle of incidence 0°
Outer diameter 12.50 ±0.10 mm
Clear aperture 11.25 mm
Thickness 3.30 ±0.20 mm
Substrate Optical glass
Surface quality 80-50
Construction Hard coating, unmounted

940 nm and 1550 nm bandpass examples

Parameter 940 nm: MidOpt Bi940 1550 nm: MidOpt Bi1550
Manufacturer usable range 930–952 nm 1540–1560 nm
FWHM 32 nm 35 nm
Peak transmission >85% >90%
Thickness 1 mm 1 mm
Surface quality 40/20 40/20

Manufacturer usable range and FWHM are different definitions and cannot replace each other.

Peak transmission is not the minimum transmission across the passband.

These examples do not establish one uniform performance level for all three wavelengths.

The 940 nm example is a related near-infrared bandpass product; suitability for a specific LiDAR or ToF module still requires optical-path validation.

Product options

Select narrowband, wide-field, low thermal drift, window integration or multi-wavelength options according to receiver path, field of view and environment.

Option A

Receiver narrowband filter

Keeps the echo band and reduces out-of-band background within the detector response. For receiver paths with defined background management; bandwidth must cover laser variation, manufacturing tolerance and angle/temperature induced filter shifts.

Design focus
Design focus: useful echo transmission, guaranteed passband, out-of-band leakage and environment
Option B

Wide-field matched filter

Designs or optimises the filter response for ray directions across the field, reducing useful signal loss at the edges. Field angle is not the angle of incidence on the filter; use lens design or ray tracing for the angular distribution.

Design focus
Design focus: incidence per field point, passband shift with angle and spatial uniformity
Option C

Low thermal drift filter

Controls spectral position and shape over a specified temperature range, designed together with the laser source temperature behaviour. Do not pursue an unchanged filter centre wavelength while ignoring laser wavelength drift.

Design focus
Design focus: filter drift, laser drift, temperature range and passband margin
Option D

Filter window integration

Combines spectral selection and window function to reduce separate optical elements. If one window passes both transmit and receive light, evaluate transmission, angle and reflection for both paths separately.

Design focus
Design focus: size, wavefront, mounting, ghost images and dual-path fit
Option E

Multi-wavelength schemes

For systems with several working wavelengths or channels, using matched filter sets or multi-band designs. Multiple passbands admit several bands at once, so confirm together with channel separation and signal processing.

Design focus
Design focus: each passband, inter-channel leakage, signal discrimination and set consistency

Options support selection discussion; final values depend on measured laser spectrum and optical path conditions.

Key design: narrower bandwidth is not always better

A narrower passband can remove some background light but can also cut off useful echo. Consider the following factors together.

Factor Effect on selection
Laser linewidth Sets the instantaneous spectral range that must be kept
Laser wavelength drift Temperature and drive changes can move the echo band
Filter manufacturing tolerance The real passband may deviate from the design position
Angle of incidence distribution Can shift or broaden the passband and cause polarisation differences
Filter thermal drift Changes the transmission window at different temperatures
Uniformity across aperture Different positions can have different spectral responses

Define the echo band that must be retained under all operating conditions before fixing bandwidth and blocking.

① Angle of incidence: passband can shift shorter ② Temperature: passband / laser overlap changes 0° passband Larger AOI (dashed) Laser T1 passband T2 (dashed) Laser Effective overlap must be assessed with real laser drift, angular distribution and temperature range. Design schematic, not measured data

Angle, temperature and aperture uniformity of interference filters are key LiDAR selection conditions and must be evaluated as a system combination.

Detailed custom specifications

Confirm each item against the optical path and system conditions to form an inspectable delivery specification.

Parameter To be specified
Laser operating range Nominal wavelength, measured linewidth and changes with temperature/drive
Centre wavelength CWL Definition, target value and manufacturing tolerance
Guaranteed passband Interval reaching target transmission at specified angle and temperature
FWHM Full width at half maximum and allowed tolerance
Passband transmission Minimum, average or transmission at a specified wavelength
Blocking depth Minimum or average OD in a specified stop band, defined separately
Blocking range Set by detector response and background light, excluding passband and transition
Angle of incidence Nominal angle, field angle distribution and beam cone
Polarisation S, P or actual polarisation state
Temperature performance Temperature range, wavelength shift and recovery requirements
Spectral uniformity Passband variation across the clear aperture
Outline and thickness Bare or mounted dimensions, tolerances and mounting allowance
Clear aperture Region over which optical performance is guaranteed
Figure and wavefront Defined by receiver imaging or coherent system requirements
Reflection and ghosting Evaluate with window, lens and detector layout
Environmental performance Agreed tests such as thermal cycling, humidity and cleaning
Inspection and delivery Spectra, dimensions, appearance and batch records

OD4 corresponds to 0.01% transmission, but the wavelength range where it applies must be stated. An average OD target does not mean every wavelength reaches the same blocking depth.

For 1550 nm designs the blocking range should also cover the sensitive region of the actual SWIR receiver; the 200–1200 nm stop band of a 905 nm product cannot simply be copied.

Bare filter Size, clear aperture, thickness and mount per drawing Mounted filter Size, clear aperture, thickness and mount per drawing Integrated window Assess transmit and receive paths separately Size, clear aperture, thickness and mount per drawing Construction schematic, not measured data

Applications

System conditions differ widely between applications; filter specifications follow the architecture.

Application Main concerns
Automotive LiDAR Background light, temperature, field of view and long-term stability
Industrial laser ranging Wavelength match, ambient light and repeat measurement stability
Robots and mobile platforms Compact structure, multi-device environments and angle matching
Logistics and warehouse sensing Target reflectance differences, installation space and environment
3D scanning Full-field uniformity and received signal quality
ToF depth-sensing modules Source spectral width, camera angle distribution and filter integration
Dedicated coherent detection Receiver architecture, polarisation, wavefront and reflection control

An application name does not mean the product has passed the corresponding system certification; detection distance and accuracy must be verified under defined targets, environments and system conditions.

Custom process

Source confirmation → receiver path analysis → spectral design → sample inspection → system validation → specification release

  1. 1

    Confirm the source

    Collect measured laser spectrum, temperature range and operating mode.

  2. 2

    Analyse the path

    Define filter position, real angular distribution and detector response.

  3. 3

    Design the spectrum

    Fix guaranteed passband, out-of-band blocking and environmental margin.

  4. 4

    Inspect samples

    Check spectra, aperture uniformity, dimensions and agreed environmental performance.

  5. 5

    Validate in system

    Check reception at different distances, fields, temperatures and background conditions.

  6. 6

    Release the specification

    Form drawings, acceptance conditions and batch consistency requirements.

Frequently asked questions

Source Factory In-house coating lines, no middlemen
Ready to Ship Standard items dispatched same or next day
Quality Guaranteed 100 % inspected, spectral report included
Express Delivery DHL / FedEx worldwide