ISO 9001 Certified Manufacturer 360° Factory Tour
480nm Narrow Bandpass Filter | Ø25.4mm OT-HBP4809025.4 — OOTEE Optics
480nm Narrow Bandpass Filter | Ø25.4mm OT-HBP4809025.4
  • BrandOOTEE Optics
  • Lead TimeIn stock — ships within 3 working days (custom parts scheduled per drawing)
  • MOQMOQ 1 pc for standard items; tiered pricing for custom parts
  • PackingIndividual boxed with a spec card enclosed

480nm Narrow Bandpass Filter | Ø25.4mm Model No.OT-HBP4809025.4

200–1100 nmUVIR40050060070080090010001100480 nmFWHM 10 nm 200–1100 nmUVIR40050060070080090010001100480 nmFWHM 10 nm
Drawn to scale from this part CWL and FWHM; UV and IR ranges shown as invisible

480nm Narrow Bandpass Filter; FWHM 10nm; transmission >90%; blocking OD5; size Ø25.4mm; AOI 0°.

Key Specs at a Glance

Tell if it fits in three seconds
  • CWL 480nm
  • Cut-off Band 200-1100nm
  • FWHM 10nm
  • Transmission >90%
  • Blocking OD OD5
  • AOI 0°
  • Request a quote
  • Tiered pricing
  • Sample pricing

Overview & Highlights

480nm Narrow Bandpass Filter | Ø25.4mm is a Narrow Bandpass Filter engineered for isolating a single spectral line or fluorescence channel, a 480nm centre wavelength, tolerance ±2nm, a 10nm bandwidth, ≥90% peak transmission, OD5 out-of-band blocking, AOI 0°.

01

OD5 deep blocking

Out-of-band blocking reaches OD5 (OD5), suppressing stray light and improving the signal-to-noise ratio.

02

≥90% high transmission

In-band transmission of ≥90% delivers a stronger signal at the same exposure and cuts the required illumination power.

03

±2nm wavelength accuracy

Tolerance held within ±2nm, so batches can be swapped without recalibration — important for quantitative instruments.

04

Ion-assisted deposition coating

Deposited by ion-assisted deposition (IAD) for a dense hard coating with low moisture uptake, minimal wavelength drift and good batch-to-batch repeatability.

Full Technical Specifications

Optical Performance

CWL 480nmCustom
CWL Tolerance ±2nmCustom
FWHM 10nmCustom
FWHM Tolerance ±2nm
Cut-off Band 200–1100nmCustom
Transmission >90%
Blocking OD OD5Custom
* Other parameters not applicable to this part
  • Passband
  • Reflection Band
  • Fluorophore
  • Reflectivity
  • T at CWL
  • Cut-off Rate

Dimensions & Tolerance

Dimensions Φ25.4mmCustom
Dimension Tol. +0.0/-0.1mmCustom
Ring Thickness 6mm
* Other parameters not applicable to this part
  • Ring Thickness Tol.
  • Clear Aperture

Substrate & Surface

Surface Quality 60/40
Coating Process Ion-assisted deposition (IAD)Custom
* Other parameters not applicable to this part
  • Substrate Thickness
  • Substrate Thickness Tol.

Operating Conditions

AOI 0°Custom
* Other parameters not applicable to this part
  • 工作温度
  • 存储温度

Note: standard-part measured values. Centre wavelength, outline dimensions and blocking depth can all be made to your drawing.

Spectral Curve

Spectral data in progress

No online curve data for this model yet — we are uploading it. The interactive chart appears automatically once the data is in.

Request the spectrum data

Need a different specification?

Every parameter can be customised; samples in 2-4 weeks with tiered production pricing.

  • Centre wavelength and bandwidth
  • Blocking depth OD
  • Substrate material and thickness
  • Outline dimensions and aperture
  • Mounting style (ring / threaded / square)

Got a drawing and a spec sheet? Send them over — our engineering team will return a feasibility assessment and a quote.

Selection Guide

Recommended for

laser line clean-up, Raman spectroscopy, single-channel fluorescence detection, atomic absorption and emission

  • pulling one line out of a continuum or a strong background
  • suppressing sidebands and pump residue at a laser output
  • multi-channel fluorescence systems that demand very low crosstalk

Not recommended for

  • passing a broader band at once — use a bandpass or longpass
  • strongly divergent beams — narrow bands shift with angle, so ask for a low-angle-shift design

How it differs from similar parts

with a 480nm centre wavelength; What separates a narrow bandpass from a standard one is bandwidth and angle sensitivity: the narrower the band, the more the centre wavelength walks with incidence angle, so the mounting angle has to stay near the design value. Bandwidth and blocking depth are built to your drawing, with batch-to-batch centre wavelength consistency as the first priority.

Applications

480nm Narrow Bandpass Filter selects the target fluorescence channel centred on 480nm while isolating excitation light and neighbouring crosstalk, widely used in fluorescence detection, flow cytometry, microplate readers, fluorescence microscopes and machine-vision illumination shaping.

Downloads

Product DrawingPendingDownload
Spectral Curve ChartPendingDownload
DatasheetPendingDownload

Documents are being added continuously; contact us if you need one right away.

FAQ

Which instruments is 480nm Narrow Bandpass Filter | Ø25.4mm used in?

Mainly laser line clean-up, Raman spectroscopy, single-channel fluorescence detection, atomic absorption and emission. Final suitability depends on your actual wavelength, bandwidth and blocking requirements — send us the instrument model or channel specs and we will confirm.

Can 480nm Narrow Bandpass Filter | Ø25.4mm be customised in wavelength, size or blocking depth?

Yes. Centre wavelength, bandwidth, blocking depth, substrate material, outline dimensions and mounting style (ring-mounted, threaded, square …) can all be made to your drawing. Samples usually take 2–4 weeks; production lead time depends on quantity.

What are the MOQ and lead time?

Standard items ship from stock with an MOQ of one piece; custom parts are scheduled after drawing approval, with MOQ and tiered pricing scaling down by batch size — see the quotation for exact figures.

How do I check whether 480nm Narrow Bandpass Filter | Ø25.4mm fits my channel?

Check three things: whether the 480nm centre wavelength matches your detection wavelength, whether the band overlaps adjacent channels, and whether the OD5 blocking meets your background suppression requirement. Send us those three and we will advise directly.

What care does this filter need?

Never touch the coating with bare hands. Clean with a lint-free cloth or swab slightly moistened with anhydrous ethanol, store in a dry clean place, and avoid concentrated stress on the coated surface during mounting.

Source Factory In-house coating lines, no middlemen
Ready to Ship Standard items dispatched same or next day
Quality Guaranteed 100 % inspected, spectral report included
Express Delivery DHL / FedEx worldwide