ISO 9001 Certified Manufacturer 360° Factory Tour
700nm Longpass Filter OT-LP700 — OOTEE Optics
700nm Longpass Filter OT-LP700
  • BrandOOTEE Optics
  • Lead TimeIn stock — ships within 3 working days (custom parts scheduled per drawing)
  • MOQMOQ 1 pc for standard items; tiered pricing for custom parts
  • PackingIndividual boxed with a spec card enclosed

700nm Longpass Filter Model No.OT-LP700

725–1100 nmIR40050060070080090010001100700 nm 725–1100 nmIR40050060070080090010001100700 nm
Drawn to scale from this part CWL and FWHM; UV and IR ranges shown as invisible

700nm Longpass Filter; passband 725-1100nm; blocking band 200-680nm; transmission >90%; blocking OD4; size Ø25.4mm; AOI 0°.

Key Specs at a Glance

Tell if it fits in three seconds
  • CWL 700nm
  • Passband 725-1100nm
  • Cut-off Band 200-680nm
  • Transmission >90%
  • T at CWL >85%
  • Blocking OD OD4
  • Request a quote
  • Tiered pricing
  • Sample pricing

Overview & Highlights

700nm Longpass Filter is a Long-pass Filter engineered for transmitting long wavelengths while blocking short ones, a 700nm centre wavelength, tolerance ±3nm, ≥90% peak transmission, OD4 out-of-band blocking, AOI 0°.

01

OD4 deep blocking

Out-of-band blocking reaches OD4 (OD4), suppressing stray light and improving the signal-to-noise ratio.

02

≥90% high transmission

In-band transmission of ≥90% delivers a stronger signal at the same exposure and cuts the required illumination power.

03

±3nm wavelength accuracy

Tolerance held within ±3nm, so batches can be swapped without recalibration — important for quantitative instruments.

04

Ion-assisted deposition coating

Deposited by ion-assisted deposition (IAD) for a dense hard coating with low moisture uptake, minimal wavelength drift and good batch-to-batch repeatability.

Full Technical Specifications

Optical Performance

CWL 700nmCustom
CWL Tolerance ±3nmCustom
Passband 725–1100nmCustom
Cut-off Band 200–680nmCustom
Transmission >90%
T at CWL >85%
Blocking OD OD4Custom
* Other parameters not applicable to this part
  • FWHM
  • FWHM Tolerance
  • Reflection Band
  • Fluorophore
  • Reflectivity
  • Cut-off Rate

Dimensions & Tolerance

Dimensions Φ25.4mmCustom
Dimension Tol. +0.0/-0.1mmCustom
* Other parameters not applicable to this part
  • Ring Thickness
  • Ring Thickness Tol.
  • Clear Aperture

Substrate & Surface

Substrate Thickness 1.1mmCustom
Surface Quality 60/40
Coating Process Ion-assisted deposition (IAD)Custom
* Other parameters not applicable to this part
  • Substrate Thickness Tol.

Operating Conditions

AOI 0°Custom
* Other parameters not applicable to this part
  • 工作温度
  • 存储温度

Note: standard-part measured values. Centre wavelength, outline dimensions and blocking depth can all be made to your drawing.

Spectral Curve

Spectral data in progress

No online curve data for this model yet — we are uploading it. The interactive chart appears automatically once the data is in.

Request the spectrum data

Need a different specification?

Every parameter can be customised; samples in 2-4 weeks with tiered production pricing.

  • Centre wavelength and bandwidth
  • Blocking depth OD
  • Substrate material and thickness
  • Outline dimensions and aperture
  • Mounting style (ring / threaded / square)

Got a drawing and a spec sheet? Send them over — our engineering team will return a feasibility assessment and a quote.

Selection Guide

Recommended for

fluorescence emission paths, NIR detection, laser combining and beam separation

  • emission paths that must reject the excitation light while collecting longer wavelengths
  • several long-wave channels sharing one filter

Not recommended for

  • precise narrow-band selection — use a bandpass
  • blocking the long-wave side — use a short-pass

How it differs from similar parts

with a 700nm centre wavelength; A long-pass defines one short-wave edge and transmits continuously above it, which is why edge steepness is the key figure for beam-separation work.

Applications

700nm Longpass Filter passes longer wavelengths while deeply blocking shorter excitation light, widely used in fluorescence emission channels, thermal-radiation suppression and spectral separation, often paired with an excitation filter and dichroic mirror as a complete filter set.

Downloads

Product DrawingPendingDownload
Spectral Curve ChartPendingDownload
DatasheetPendingDownload

Documents are being added continuously; contact us if you need one right away.

FAQ

Which instruments is 700nm Longpass Filter used in?

Mainly fluorescence emission paths, NIR detection, laser combining and beam separation. Final suitability depends on your actual wavelength, bandwidth and blocking requirements — send us the instrument model or channel specs and we will confirm.

Can 700nm Longpass Filter be customised in wavelength, size or blocking depth?

Yes. Centre wavelength, bandwidth, blocking depth, substrate material, outline dimensions and mounting style (ring-mounted, threaded, square …) can all be made to your drawing. Samples usually take 2–4 weeks; production lead time depends on quantity.

What are the MOQ and lead time?

Standard items ship from stock with an MOQ of one piece; custom parts are scheduled after drawing approval, with MOQ and tiered pricing scaling down by batch size — see the quotation for exact figures.

How do I check whether 700nm Longpass Filter fits my channel?

Check three things: whether the 700nm centre wavelength matches your detection wavelength, whether the band overlaps adjacent channels, and whether the OD4 blocking meets your background suppression requirement. Send us those three and we will advise directly.

What care does this filter need?

Never touch the coating with bare hands. Clean with a lint-free cloth or swab slightly moistened with anhydrous ethanol, store in a dry clean place, and avoid concentrated stress on the coated surface during mounting.

Source Factory In-house coating lines, no middlemen
Ready to Ship Standard items dispatched same or next day
Quality Guaranteed 100 % inspected, spectral report included
Express Delivery DHL / FedEx worldwide