ISO 9001 Certified Manufacturer 360° Factory Tour
561nm Longpass Filter for Microscopes OT-MLP561 — OOTEE Optics
561nm Longpass Filter for Microscopes OT-MLP561
  • BrandOOTEE Optics
  • Lead TimeIn stock — ships within 3 working days (custom parts scheduled per drawing)
  • MOQMOQ 1 pc for standard items; tiered pricing for custom parts
  • PackingIndividual boxed with a spec card enclosed

561nm Longpass Filter for Microscopes Model No.OT-MLP561

580–900 nmIR400450500550600650700750800850900950561 nm 580–900 nmIR400500600700800900561 nm
Drawn to scale from this part CWL and FWHM; UV and IR ranges shown as invisible

561nm Longpass Filter for Microscopes; passband 580-900nm; blocking band 200-548nm; transmission >93%; blocking OD6; size Ø25mm; AOI 0°.

Key Specs at a Glance

Tell if it fits in three seconds
  • CWL 561nm
  • Passband 580-900nm
  • Cut-off Band 200-548nm
  • Transmission >93%
  • Blocking OD OD6
  • AOI 0°
  • Request a quote
  • Tiered pricing
  • Sample pricing

Overview & Highlights

561nm Longpass Filter for Microscopes is a Fluorescence Microscope Filter Set engineered for imaging path of widefield fluorescence microscopes, a 561nm centre wavelength, ≥93% peak transmission, OD6 out-of-band blocking, AOI 0°.

01

OD6 deep blocking

Out-of-band blocking reaches OD6 (OD6), suppressing stray light and improving the signal-to-noise ratio.

02

≥93% high transmission

In-band transmission of ≥93% delivers a stronger signal at the same exposure and cuts the required illumination power.

03

Ion-assisted deposition coating

Deposited by ion-assisted deposition (IAD) for a dense hard coating with low moisture uptake, minimal wavelength drift and good batch-to-batch repeatability.

Full Technical Specifications

Optical Performance

CWL 561nmCustom
Passband 580–900nmCustom
Cut-off Band 200–548nmCustom
Transmission >93%
Blocking OD OD6Custom
* Other parameters not applicable to this part
  • CWL Tolerance
  • FWHM
  • FWHM Tolerance
  • Reflection Band
  • Fluorophore
  • Reflectivity
  • T at CWL
  • Cut-off Rate

Dimensions & Tolerance

Dimensions Φ25mmCustom
Dimension Tol. +0.0/-0.1mmCustom
* Other parameters not applicable to this part
  • Ring Thickness
  • Ring Thickness Tol.
  • Clear Aperture

Substrate & Surface

Substrate Thickness 2mmCustom
Surface Quality 60/40
Coating Process Ion-assisted deposition (IAD)Custom
* Other parameters not applicable to this part
  • Substrate Thickness Tol.

Operating Conditions

AOI 0°Custom
* Other parameters not applicable to this part
  • 工作温度
  • 存储温度

Note: standard-part measured values. Centre wavelength, outline dimensions and blocking depth can all be made to your drawing.

Spectral Curve

Spectral data in progress

No online curve data for this model yet — we are uploading it. The interactive chart appears automatically once the data is in.

Request the spectrum data

Need a different specification?

Every parameter can be customised; samples in 2-4 weeks with tiered production pricing.

  • Centre wavelength and bandwidth
  • Blocking depth OD
  • Substrate material and thickness
  • Outline dimensions and aperture
  • Mounting style (ring / threaded / square)

Got a drawing and a spec sheet? Send them over — our engineering team will return a feasibility assessment and a quote.

Selection Guide

Recommended for

the three-piece excitation (EX) / dichroic (DM) / emission (EM) assembly

  • selecting a matched set per fluorophore channel (DAPI / FITC / TRITC / Cy5 …)
  • weak-signal imaging that needs OD6 or deeper blocking

Not recommended for

  • using a single element outside a fluorescence path
  • high-power laser combining — use dedicated laser filters

How it differs from similar parts

with a 561nm centre wavelength; The three elements are designed around each other: the dichroic transition band must cover both the excitation and the emission passband, so swapping one element alone usually introduces cross-talk or signal loss.

Applications

561nm Longpass Filter for Microscopes is configured to the excitation/emission spectra of fluorophores and mounted in the filter cube of fluorescence microscopes, forming a complete set with the exciter and dichroic mirror for biological and pathology imaging.

Downloads

Product DrawingPendingDownload
Spectral Curve ChartPendingDownload
DatasheetPendingDownload

Documents are being added continuously; contact us if you need one right away.

FAQ

Which instruments is 561nm Longpass Filter for Microscopes used in?

Mainly the three-piece excitation (EX) / dichroic (DM) / emission (EM) assembly. Final suitability depends on your actual wavelength, bandwidth and blocking requirements — send us the instrument model or channel specs and we will confirm.

Can 561nm Longpass Filter for Microscopes be customised in wavelength, size or blocking depth?

Yes. Centre wavelength, bandwidth, blocking depth, substrate material, outline dimensions and mounting style (ring-mounted, threaded, square …) can all be made to your drawing. Samples usually take 2–4 weeks; production lead time depends on quantity.

What are the MOQ and lead time?

Standard items ship from stock with an MOQ of one piece; custom parts are scheduled after drawing approval, with MOQ and tiered pricing scaling down by batch size — see the quotation for exact figures.

How do I check whether 561nm Longpass Filter for Microscopes fits my channel?

Check three things: whether the 561nm centre wavelength matches your detection wavelength, whether the band overlaps adjacent channels, and whether the OD6 blocking meets your background suppression requirement. Send us those three and we will advise directly.

What care does this filter need?

Never touch the coating with bare hands. Clean with a lint-free cloth or swab slightly moistened with anhydrous ethanol, store in a dry clean place, and avoid concentrated stress on the coated surface during mounting.

Source Factory In-house coating lines, no middlemen
Ready to Ship Standard items dispatched same or next day
Quality Guaranteed 100 % inspected, spectral report included
Express Delivery DHL / FedEx worldwide