ISO 9001 Certified Manufacturer 360° Factory Tour
ND1.0 Neutral Density Filter OT-ND10 — OOTEE Optics
ND1.0 Neutral Density Filter OT-ND10
  • BrandOOTEE Optics
  • Lead TimeIn stock — ships within 3 working days (custom parts scheduled per drawing)
  • MOQMOQ 1 pc for standard items; tiered pricing for custom parts
  • PackingIndividual boxed with a spec card enclosed

ND1.0 Neutral Density Filter Model No.OT-ND10

400–700 nmUV350400450500550600650700750 400–700 nmUV400500600700
Drawn to scale from this part CWL and FWHM; UV and IR ranges shown as invisible

ND1.0 Neutral Density Filter; operating band 400-700nm; optical density OD1.0; transmission 10%; size Ø25.4mm; AOI 0°.

Key Specs at a Glance

Tell if it fits in three seconds
  • Passband 400-700nm
  • Transmission 10%
  • AOI 0°
  • Dimensions Φ25.4mm
  • Substrate 1.1mm
  • Surface Quality 60/40
  • Request a quote
  • Tiered pricing
  • Sample pricing

Overview & Highlights

ND1.0 Neutral Density Filter is a Neutral Density Filter engineered for attenuating intensity without shifting colour, passband 400-700nm, ≥10% peak transmission, AOI 0°.

01

Ion-assisted deposition coating

Deposited by ion-assisted deposition (IAD) for a dense hard coating with low moisture uptake, minimal wavelength drift and good batch-to-batch repeatability.

Full Technical Specifications

Optical Performance

Passband 400–700nmCustom
Transmission 10%
* Other parameters not applicable to this part
  • CWL
  • CWL Tolerance
  • FWHM
  • FWHM Tolerance
  • Reflection Band
  • Cut-off Band
  • Fluorophore
  • Reflectivity
  • T at CWL
  • Cut-off Rate
  • Blocking OD

Dimensions & Tolerance

Dimensions Φ25.4mmCustom
Dimension Tol. +0.0/-0.1mmCustom
* Other parameters not applicable to this part
  • Ring Thickness
  • Ring Thickness Tol.
  • Clear Aperture

Substrate & Surface

Substrate Thickness 1.1mmCustom
Surface Quality 60/40
Coating Process Ion-assisted deposition (IAD)Custom
* Other parameters not applicable to this part
  • Substrate Thickness Tol.

Operating Conditions

AOI 0°Custom
* Other parameters not applicable to this part
  • 工作温度
  • 存储温度

Note: standard-part measured values. Centre wavelength, outline dimensions and blocking depth can all be made to your drawing.

Spectral Curve

Spectral data in progress

No online curve data for this model yet — we are uploading it. The interactive chart appears automatically once the data is in.

Request the spectrum data

Need a different specification?

Every parameter can be customised; samples in 2-4 weeks with tiered production pricing.

  • Centre wavelength and bandwidth
  • Blocking depth OD
  • Substrate material and thickness
  • Outline dimensions and aperture
  • Mounting style (ring / threaded / square)

Got a drawing and a spec sheet? Send them over — our engineering team will return a feasibility assessment and a quote.

Selection Guide

Recommended for

camera and detector anti-blooming, laser power control, microscope illumination dimming, multi-exposure imaging

  • bringing strong light down by a fixed factor without changing its colour
  • pulling a detector back into its linear range
  • stacking several parts for continuously variable density

Not recommended for

  • wavelength selection — ND treats every wavelength in its band alike
  • sustained high-power laser use — absorptive ND heats up, so switch to a reflective type and check damage threshold

How it differs from similar parts

covering 400-700nm; An ND filter changes intensity only. Three things decide the part: flatness across your band, the tolerance between nominal and actual optical density, and absorptive versus reflective — absorptive is cheaper but heat-sensitive, reflective handles power but needs the reflected path managed.

Applications

ND1.0 Neutral Density Filter attenuates light uniformly across a broad band without altering the spectral distribution, widely used for camera/detector exposure control, laser power calibration and energy balancing in interferometry and optical metrology.

Downloads

Product DrawingPendingDownload
Spectral Curve ChartPendingDownload
DatasheetPendingDownload

Documents are being added continuously; contact us if you need one right away.

FAQ

Which instruments is ND1.0 Neutral Density Filter used in?

Mainly camera and detector anti-blooming, laser power control, microscope illumination dimming, multi-exposure imaging. Final suitability depends on your actual wavelength, bandwidth and blocking requirements — send us the instrument model or channel specs and we will confirm.

Can ND1.0 Neutral Density Filter be customised in wavelength, size or blocking depth?

Yes. Centre wavelength, bandwidth, blocking depth, substrate material, outline dimensions and mounting style (ring-mounted, threaded, square …) can all be made to your drawing. Samples usually take 2–4 weeks; production lead time depends on quantity.

What are the MOQ and lead time?

Standard items ship from stock with an MOQ of one piece; custom parts are scheduled after drawing approval, with MOQ and tiered pricing scaling down by batch size — see the quotation for exact figures.

How do I check whether ND1.0 Neutral Density Filter fits my channel?

Check three things: whether the working band matches your detection wavelength, whether the band overlaps adjacent channels, and whether the blocking depth meets your background suppression requirement. Send us those three and we will advise directly.

What care does this filter need?

Never touch the coating with bare hands. Clean with a lint-free cloth or swab slightly moistened with anhydrous ethanol, store in a dry clean place, and avoid concentrated stress on the coated surface during mounting.

Source Factory In-house coating lines, no middlemen
Ready to Ship Standard items dispatched same or next day
Quality Guaranteed 100 % inspected, spectral report included
Express Delivery DHL / FedEx worldwide