ISO 9001 Certified Manufacturer 360° Factory Tour

Non-contact thermometry · Long-wave infrared optics

Infrared Thermometer Optical Filters

Matched to the thermal radiation bands used for non-contact temperature measurement

For infrared thermometers and thermopile sensing modules. Working from the detector response, the target temperature range and the actual optical path, we define a suitable infrared transmission window and out-of-band blocking range. Combining coating design with infrared substrate selection supports target radiation collection, suppression of non-target bands and sensor-window integration.

  • Long-wave infrared
  • Thermopile matching
  • Out-of-band rejection
  • Custom filter windows
8–14 μm Common LWIR thermometry band
from ≈5.5 μm Long-pass cut-on example
Thermopile window Discrete filter or integrated
Infrared thermometer receiver, filter window and thermopile detector layout (schematic)
Structure and element positions are schematic and vary between models

What is an infrared thermometer filter?

An infrared thermometer filter is a wavelength-selective element mounted in the infrared receiving path. It transmits radiation inside the design range and reduces the share of non-target wavelengths that reach the detector, so that the received signal matches the spectral response required by the thermometry system.

Every object emits thermal radiation related to its own temperature. That radiation is distributed over a range of wavelengths rather than concentrated at one wavelength for a given temperature. An infrared thermometer receives radiation within a selected band, the detector converts it into an electrical signal, and the temperature is then calculated with ambient compensation, the emissivity setting and the calibration relationship.

The filter limits the spectral range that is received. It does not read temperature itself and does not on its own determine the accuracy of the instrument. Its transmission curve, the detector response and the optical layout together determine the radiant energy the system actually receives.

The filtering element can be a discrete filter or integrated into the sensor package window.

How the filter takes part in non-contact thermometry

From receiving target radiation to converting it into a temperature reading, the filter is responsible only for wavelength selection.

  1. 01

    The receiver collects thermal radiation from the target surface

    The thermometer collects infrared radiation within its field of view. The actual signal depends not only on the target temperature but also on surface emissivity, background reflection and transmission through the optical path.

  2. 02

    The optics define what is received

    Lens, aperture and mechanical structure define the main receiving area; the filter defines the main receiving band. The former answers "where from", the latter "which wavelengths".

  3. 03

    The detector converts radiation into an electrical signal

    A thermopile detector absorbs radiation and produces an electrical signal related to its thermal state. Filter transmission and detector response together determine how much each wavelength contributes to the signal.

  4. 04

    Compensation and calibration give the temperature

    The system calculates the target temperature from the received signal and the sensor temperature. Instrument calibration should include the filter, window and optics actually used; after changing these parts, the existing calibration has to be reviewed.

Target surface thermal optics Filter window Thermo- pile radiation to signal Signal processing compensation Temperature by calibration Visible aiming laser: aiming only, not used for measurement ① Receive: IR radiation in the field of view passes the optics and filter window ② Convert: thermopile turns radiation into a signal; transmission sets each band contribution ③ Compute: ambient and emissivity combined with instrument calibration
Target thermal radiation → receiving optics → filter window → thermopile detector → signal processing and temperature compensation → temperature display The element order is schematic; some products integrate the filtering function into the detector package.

Band selection: why "infrared transmission" is not enough

"Infrared" covers a very wide wavelength range. A material or filter that transmits near-infrared is not necessarily suitable for long-wave infrared thermometry. A specification has to state the effective transmission range, the blocking range and the corresponding test conditions.

Band or structure Technical meaning Selection focus
8–14 μm band option A common long-wave infrared thermometry direction Match to detector, target temperature range and instrument calibration
Long-pass from about 5.5 μm Suppresses short-wave radiation and forms an effective transmission region at longer wavelengths Upper limit set by substrate, coating and detector together
Dedicated bandpass option Selects a limited band for a specific target or transmission window Requires separate assessment of material spectrum and useful signal
Broadband infrared AR window Reduces surface reflection loss over the target range Does not by itself provide the required out-of-band blocking

These bands describe possible directions and are not a uniform specification for the whole product range.

Product options: choosing a filter structure for the system

The directions below can be evaluated; the right choice depends on the detector, the optical path and the calibration requirements of the instrument.

Option A

Long-wave infrared bandpass filter

Forms a transmission window inside the target infrared range and sets blocking requirements on specified regions of both the short-wave and long-wave sides. Suitable for paths that must clearly limit the received band. Besides passband transmission, check both transition regions, out-of-band leakage and spectral behaviour at the actual incidence angle.

Key parameters
Passband edges, average or minimum transmission, blocking ranges on both sides, working angle.
Option B

Infrared long-pass filter

A short-wave cut-on edge reduces transmission in the visible, near-infrared and other specified short-wave ranges while keeping the required long-wave infrared signal. "Long-pass" does not mean every longer wavelength is transmitted continuously; the effective transmission region is still limited by substrate absorption, coating structure and detector response.

Key parameters
Cut-on edge, edge criterion, effective transmission region, short-wave suppression.
Option C

Sensor package filter window

Combines the filtering function with the thermopile package window and adapts it to the package size and mounting structure while meeting the spectral requirement. Window thickness, clear aperture, edge condition, package process temperature and assembly stress all have to be considered. Meeting the spectral curve alone does not mean the existing package window can be replaced directly.

Key parameters
Outline tolerance, clear aperture, coating adhesion, package process compatibility.
Option D

External infrared protection window

Protects internal optical elements where required; AR or filtering functions can be evaluated on request. An external window changes the radiation reaching the detector and may add its own thermal emission and reflection, so it should be validated as part of the instrument optical path rather than treated as an ordinary cover.

Key parameters
Transmission in the target band, temperature behaviour, contamination and cleaning effects, system calibration fit.

Technical parameters and customisation

The table lists the parameters to confirm item by item during customisation; capability figures are confirmed against the project requirement and validated fabrication and inspection results.

Parameter Customisation Explanation
Effective transmission band Set by detector and measurement use States the start and end wavelengths whose performance is guaranteed
Filter type Long-pass, bandpass or AR window Different structures carry different spectral functions
Passband transmission Average or minimum value A high average does not mean every wavelength meets the same threshold
Blocking edge Edge position and permitted deviation State the transmission level used to define the edge position
Out-of-band blocking Transmission limit or OD for specified bands The blocking range must always be stated together with it
Working incidence angle Nominal angle and angular spread Must cover the receiving conditions of the real optical path
Substrate and thickness Assessed for infrared transmission, strength and process Material grade, thickness and absorption all affect the finished part
Outline dimensions Round, square or drawing-specific Agree dimensional tolerances and assembly clearance as well
Clear aperture Region where optical performance is guaranteed Distinct from the outside diameter or outline
Surface quality Scratch and dig requirements Agreed by application and inspection method
Edge finishing Chamfer, chip limits and similar Matched to packaging, assembly and reliability requirements
Environmental performance Operating temperature, humidity, thermal cycling Validation method defined against actual conditions
Inspection and delivery Spectral data, dimensional records, batch documents Delivery items and sampling scheme stated in the specification

The substrate of an infrared filter cannot be chosen from a name such as "transparent" or "infrared material" alone. Its transmission in the target band at the actual thickness has to be verified, together with coating, temperature and assembly conditions. An ordinary cover that looks clear in visible light cannot be assumed suitable for long-wave infrared thermometry.

Long-pass: short-wave cut-on Bandpass: 8–14 μm window T% 100 0 μm 2 5.5 8 14 16 short-wave blocking target window long-wave cut-off ※ Design schematic, not measured data; edges and blocking by agreement
Bandpass versus long-pass: target infrared window, short-wave cut-on edge and out-of-band blocking range (design schematic, not measured data)

Four questions worth understanding before selection

These points come up most often when matching a filter to a thermometry system.

Q1

Does higher transmission always mean a more accurate temperature?

Higher transmission usually helps preserve useful radiation, but accuracy also depends on spectral consistency, background influence, detector noise and calibration. In an already calibrated system, a replacement filter with higher transmission can still change the relationship between signal and temperature.

Q2

Can a filter remove the effect of ambient temperature?

A filter can reduce radiation from some non-target bands, but it cannot remove all thermal background. Target and background may radiate in the same band, and changes in window or housing temperature can affect the received result. This needs structural design, temperature compensation and instrument-level validation.

Q3

What is emissivity?

Emissivity describes how strongly a surface emits thermal radiation compared with a blackbody at the same temperature under given conditions. It is affected by material, surface state, wavelength and viewing direction. Two surfaces at the same temperature can still present different radiation to the receiver; a filter cannot correct an unknown emissivity, so surface properties remain a condition the system has to account for.

Q4

Does the filter determine measuring distance and spot size?

The filter is responsible for wavelength selection. The measured area also depends on the receiving optics, the detector size and the measuring distance. The distance-to-spot ratio D:S describes the relation between measuring distance and a defined spot size; the energy fraction it implies is defined by the instrument.

Applications and adaptation points

Different instrument formats place different requirements on the filter structure.

Application Typical need Filter design focus
Handheld industrial thermometers Non-contact measurement of equipment surfaces and inspection routes Spectral match, window stability, contamination protection
Body-surface temperature devices Radiation detection under small temperature differences Signal stability, thermal environment influence, instrument calibration
Embedded thermopile modules Compact structure and system integration Miniature window, package size, assembly compatibility
Fixed non-contact stations Continuous measurement and long-term operation Environmental robustness, batch consistency, maintenance conditions
Material-specific measurement systems Measurement against material spectrum or a specific window Dedicated band selection and application validation
① Discrete filter filter thermo- pile Filter mounted separately, easy to replace and angle-tune ② Integrated package filter cap thermopile die same package Filtering built into the package window; process temperature and stress matter ③ External window window thermo- pile own emission The window changes incoming radiation and adds emission; validate in-system
Three filter positions: discrete filter, integrated package window and external protection window (structural schematic)

The performance of a single filter is not equivalent to the temperature accuracy of the instrument; body-temperature and industrial applications have different requirements and should be assessed separately.

Custom process

Requirement review → spectral design → mechanical matching → sample inspection → instrument validation → specification release

  1. 1

    Requirement review

    Detector model, target temperature range, operating environment and mounting position.

  2. 2

    Spectral design

    Define transmission range, blocking range, transmission level and permitted deviation.

  3. 3

    Mechanical matching

    Confirm outline, thickness, clear aperture and fixing method.

  4. 4

    Sample inspection

    Check spectrum, dimensions and the agreed appearance items.

  5. 5

    Instrument validation

    Check response, environmental influence and calibration fit in the real optical path.

  6. 6

    Specification release

    Issue drawings, acceptance criteria and batch delivery requirements.

Frequently asked questions

Source Factory In-house coating lines, no middlemen
Ready to Ship Standard items dispatched same or next day
Quality Guaranteed 100 % inspected, spectral report included
Express Delivery DHL / FedEx worldwide