Laser World of Photonics China Recap: Three Concentrated Demands
OOTEE Optics exhibited at this year's Laser World of Photonics China and met a large number of professional visitors over three days. Demand concentrated on three areas, reflecting where the industry's attention currently sits.
Demand One: LiDAR Narrowband Filters
Visitors came largely from automotive and robotics, with very specific requirements: 905 nm or 1550 nm narrowband, 1–5 nm bandwidth, solar background suppression of OD6 or better. The two most frequent questions were "how much does the wavelength drift over a wide temperature range?" and "can it pass automotive-grade qualification?" Our answer: drift can be held small through coating and substrate matching, and we have supported customers through environmental testing on several projects.
Demand Two: Multichannel Fluorescence Filters
Life-science instrument makers asked for two things: complete-set supply and batch consistency. The pain point in multichannel systems is not single-filter performance but matching across the set and whether replacing a filter forces recalibration. We demonstrated our approach of configuring complete sets by instrument model along with batch record keeping, to positive feedback.
Demand Three: Medical Infrared Filters
Medical visitors focused on domestic registration and quality systems, asking most often about ISO 13485 experience, batch data retention and traceability — an area we have invested in heavily in recent years.
Most Frequent On-Site Questions
| Question | Our key points |
|---|---|
| What is the minimum order quantity? | Small batches accepted for standard specifications; custom designs have a minimum run requirement |
| What is the prototyping lead time? | 2–3 weeks for standard designs, 3–5 weeks for new coating designs |
| Can you provide measured spectral curves? | Yes — 200–1700 nm measured data is retained for every shipped batch |
| Can you make 1–3 nm ultra-narrowband? | Yes, with yield and lead time assessed per wavelength and bandwidth |
| How is thermal drift controlled? | Coating designed for the operating temperature range, with measured drift data |
Could Not Attend?
We continue to follow up on documentation and sample requests from the show. If you have specific spectral targets or an application in mind, leave a message through our contact page, or browse the product centre first.