ISO 9001 Certified Manufacturer 360° Factory Tour
550nm Shortpass Dichroic Mirror OT-DMSP550 — OOTEE Optics
550nm Shortpass Dichroic Mirror OT-DMSP550
  • BrandOOTEE Optics
  • Lead TimeIn stock — ships within 3 working days (custom parts scheduled per drawing)
  • MOQMOQ 1 pc for standard items; tiered pricing for custom parts
  • PackingIndividual boxed with a spec card enclosed

550nm Shortpass Dichroic Mirror Model No.OT-DMSP550

350–540 nmUV350400450500550600650700750 350–540 nmUV400500600700
Drawn to scale from this part CWL and FWHM; UV and IR ranges shown as invisible

550nm Shortpass Dichroic Mirror; passband 350-540nm; transmission >90%; reflectivity >95%; size 25.4×35.6×1.1mm; AOI 45°.

Key Specs at a Glance

Tell if it fits in three seconds
  • Passband 350-540nm
  • Cut-off Band 565-900nm
  • Transmission >90%
  • Reflectivity >95%
  • AOI 45°
  • Dimensions 25.4×35.6×1.1mm
  • Request a quote
  • Tiered pricing
  • Sample pricing

Overview & Highlights

550nm Shortpass Dichroic Mirror is a Dichroic Mirror engineered for beam splitting at 45° incidence, passband 350-540nm, ≥90% peak transmission, AOI 45°.

01

≥90% high transmission

In-band transmission of ≥90% delivers a stronger signal at the same exposure and cuts the required illumination power.

02

Ion-assisted deposition coating

Deposited by ion-assisted deposition (IAD) for a dense hard coating with low moisture uptake, minimal wavelength drift and good batch-to-batch repeatability.

Full Technical Specifications

Optical Performance

Passband 350–540nmCustom
Cut-off Band 565–900nmCustom
Transmission >90%
Reflectivity >95%
* Other parameters not applicable to this part
  • CWL
  • CWL Tolerance
  • FWHM
  • FWHM Tolerance
  • Reflection Band
  • Fluorophore
  • T at CWL
  • Cut-off Rate
  • Blocking OD

Dimensions & Tolerance

Dimensions 25.4×35.6×1.1mmCustom
Dimension Tol. +0.0/-0.1mmCustom
* Other parameters not applicable to this part
  • Ring Thickness
  • Ring Thickness Tol.
  • Clear Aperture

Substrate & Surface

Substrate Thickness 1.1mmCustom
Surface Quality 60/40
Coating Process Ion-assisted deposition (IAD)Custom
* Other parameters not applicable to this part
  • Substrate Thickness Tol.

Operating Conditions

AOI 45°Custom
* Other parameters not applicable to this part
  • 工作温度
  • 存储温度

Note: standard-part measured values. Centre wavelength, outline dimensions and blocking depth can all be made to your drawing.

Spectral Curve

Spectral data in progress

No online curve data for this model yet — we are uploading it. The interactive chart appears automatically once the data is in.

Request the spectrum data

Need a different specification?

Every parameter can be customised; samples in 2-4 weeks with tiered production pricing.

  • Centre wavelength and bandwidth
  • Blocking depth OD
  • Substrate material and thickness
  • Outline dimensions and aperture
  • Mounting style (ring / threaded / square)

Got a drawing and a spec sheet? Send them over — our engineering team will return a feasibility assessment and a quote.

Selection Guide

Recommended for

excitation/emission separation in fluorescence microscopes, flow cytometry, coaxial illumination

  • splitting one beam into reflected and transmitted paths at 45° (or the specified angle)
  • the DM element of a fluorescence filter set

Not recommended for

  • use at normal incidence (0°) as an ordinary mirror or filter — the edge shifts noticeably
  • narrow-band selection — use a bandpass filter

How it differs from similar parts

covering 350-540nm; A dichroic edge moves with angle of incidence: roughly a few nm per degree, so it must be specified at the real AOI, and for polarised light the S and P transition bands differ.

Applications

550nm Shortpass Dichroic Mirror splits light by wavelength at 45° — directing excitation light to the sample while returning emitted fluorescence to the detector. It is widely used in the excitation/emission paths of fluorescence microscopes, in-vivo imaging, flow cytometers and confocal systems.

Downloads

Product DrawingPendingDownload
Spectral Curve ChartPendingDownload
DatasheetPendingDownload

Documents are being added continuously; contact us if you need one right away.

FAQ

Which instruments is 550nm Shortpass Dichroic Mirror used in?

Mainly excitation/emission separation in fluorescence microscopes, flow cytometry, coaxial illumination. Final suitability depends on your actual wavelength, bandwidth and blocking requirements — send us the instrument model or channel specs and we will confirm.

Can 550nm Shortpass Dichroic Mirror be customised in wavelength, size or blocking depth?

Yes. Centre wavelength, bandwidth, blocking depth, substrate material, outline dimensions and mounting style (ring-mounted, threaded, square …) can all be made to your drawing. Samples usually take 2–4 weeks; production lead time depends on quantity.

What are the MOQ and lead time?

Standard items ship from stock with an MOQ of one piece; custom parts are scheduled after drawing approval, with MOQ and tiered pricing scaling down by batch size — see the quotation for exact figures.

How do I check whether 550nm Shortpass Dichroic Mirror fits my channel?

Check three things: whether the working band matches your detection wavelength, whether the band overlaps adjacent channels, and whether the blocking depth meets your background suppression requirement. Send us those three and we will advise directly.

What care does this filter need?

Never touch the coating with bare hands. Clean with a lint-free cloth or swab slightly moistened with anhydrous ethanol, store in a dry clean place, and avoid concentrated stress on the coated surface during mounting.

Source Factory In-house coating lines, no middlemen
Ready to Ship Standard items dispatched same or next day
Quality Guaranteed 100 % inspected, spectral report included
Express Delivery DHL / FedEx worldwide