ISO 9001 Certified Manufacturer 360° Factory Tour
Wiki & Glossary

Peak Transmission (Tpeak): Higher Is Good, But Never Read It Alone

· 10 views · 2 min read · OOTEE Optics Editorial

Original content by the OOTEE Optics editorial team, drawn from first-hand production line and inspection data. Please credit the source when republishing.

Given limits in expertise and test conditions, the theories, parameters and conclusions here carry no guarantee of absolute accuracy. For technical learning and exchange only - never the sole basis for design, acceptance or selection. Corrections welcome.

Peak Transmission (Tpeak): Higher Is Good, But Never Read It Alone

Peak transmission (Tpeak) is the highest transmission a filter reaches inside its passband, in percent. It is the most visible number on a datasheet and the most frequently misread.

"T greater than 90%" sounds excellent, but it describes a single point on the curve. What about the passband edges? The average across the band? The worst case? Tpeak answers none of those.

What eats the transmission

Light passing through a filter faces three tolls:

  • Surface reflection: an uncoated optical surface reflects about 4%, so two faces cost 8%. A good AR coating on both sides brings that below 1%.
  • Substrate absorption: ordinary glass is nearly lossless in the visible but attenuates strongly below 350 nm and in parts of the infrared - which is why fused silica, sapphire and calcium fluoride exist.
  • Coating absorption and scatter: more layers mean more interfaces, more residual absorption and more microscopic scatter. This is the fundamental reason ultra-narrow filters never reach high peaks.

So "Tpeak 95%" means total loss of only 5%, which is excellent for a visible narrowband filter - while "Tpeak 60%" is already respectable for a 1 nm Raman filter.

Realistic expectations by product family

TypeTypical TpeakNote
Visible wide band (FWHM 40 nm plus)90-95%Simple stack, easy to push high
Visible narrowband (FWHM 10 nm)85-93%Mainstream level
Ultraviolet narrowband (below 350 nm)50-80%Limited by substrate and coating materials
Ultra narrow (FWHM 1-2 nm)40-70%Very many layers, scatter accumulates
Neutral density (ND)By design (1%, 10%, ...)Transmission is deliberately suppressed

Tpeak, Tavg, Tmin: do not judge by the first one

The three metrics serve completely different purposes:

  1. Tpeak: a marketing-style figure, useful for comparing process capability between vendors;
  2. Tavg: average across the passband - the realistic input for exposure time and power budgets;
  3. Tmin: the guaranteed floor anywhere in the passband - the right basis for acceptance and warranty.

A filter quoted at Tpeak 92%, Tavg 85%, Tmin 78% behaves much closer to 85% than to 92%. Design your exposure around 92% and the images come out dark.

When a higher peak is worth paying for

Each extra percent of peak transmission usually means better coating materials, tighter screening or a more expensive substrate. Whether it pays off depends on whether your system is signal-limited or background-limited:

  • Signal-limited (weak fluorescence, Raman, long-range imaging, low-light vision): 5% more transmission buys shorter exposure or better SNR - worth the money.
  • Background-limited (strong ambient light, excitation leakage): deeper blocking and tighter bandwidth pay back far more than a higher peak.

One more caveat: peak values are measured at 0 degrees, clean and dry, in a lab. On the instrument, dust, fingerprints and condensation cost a few more percent. Harsh environments deserve a protective window or a hydrophobic top layer.

Wondering whether a target peak is actually manufacturable? Send CWL, bandwidth and spectral band to sales@ootee.cn for a realistic range and its cost tier - better than specifying something nobody can build.

Related Reading

View all

Related Products

View all products

Need a custom optical filter?

Send us your drawing and spectral targets — an engineer replies with a feasibility check and quotation within one business day.

Source Factory In-house coating lines, no middlemen
Ready to Ship Standard items dispatched same or next day
Quality Guaranteed 100 % inspected, spectral report included
Express Delivery DHL / FedEx worldwide